Choosing a bike rack for the front of an RV requires balancing mounting method, weight capacity, and security. Front-mounted options work with A-frame tongues, 2-inch hitch receivers, or ladder-mounted setups and can keep rear doors clear. Below are five top picks that fit common RV front-mount configurations, with notes on installation, bike capacity, and compatibility with fat tires or electric bikes. The selections cover a range of RV types—from travel trailers to motorhomes—so travelers can confidently haul bikes on demanding road trips.
| Product | Brand | Mount Type | Capacity |
|---|---|---|---|
| Stromberg Carlson CC-275 Bike Bunk | Stromberg Carlson | Front A-frame Tongue Mount | Up to 100 lbs |
| TrailV2 Plus 2-Bike Hitch Rack | STUDTREX | 2″ Receiver Hitch | 170 lbs total |
| Hollywood RV Rider Hitch Bike Rack | Hollywood Racks | 2-Bike Hitch Mount | 160 lbs total |
| MEEVIZ 2-Bike Hitch Rack With Lock | Meeviz | 2-Bike Hitch Mount | 180 lbs total |
| Young Electric 2-Bike Hitch Rack | Young Electric | 2-Bike Hitch Mount | 200 lbs total |
Stromberg Carlson CC-275 Bike Bunk
The CC-275 Bike Bunk adds a raised 2″ receiver to your A-frame trailer, enabling RV-approved bike racks to attach securely at the front of the RV. This mounting solution is designed to support up to 100 pounds, making it compatible with most standard bikes and many fat-tire models when paired with the right rack. The bunk’s all-steel construction emphasizes durability for long trips, while the adjustable posts accommodate a range of trailer sizes. This front-mount option keeps bikes ready for quick loading and unloading during travel.
Key mounting versatility comes from adjustable vertical posts that fit frame widths from 14 to 55 inches, covering a broad spectrum of A-frame configurations. The raised receiver position helps isolate bikes from road spray and road shock, contributing to stability on uneven pavement. Installation relies on common hardware and straightforward alignment, offering a practical, reliable front-end solution for RVers who want to maximize trailer space without sacrificing bike access.
- Raised 2″ receiver on the A-frame for RV bike racks
- Adjustable width: 14″ to 55″ frame spacing
- All-steel design supports up to 100 lbs
TrailV2 Plus 2-Bike Hitch Rack
TrailV2 Plus is a heavy-duty hitch-mounted rack designed for two bikes, with a total capacity of 170 pounds. A key upgrade is the extended ramp—46 inches—making loading easier for vehicles with higher hitch receivers. The included guide kit and two screw-mounted slopes help accommodate wider tires, and a wrap-around front cradle plus padded clamps protect frames during transport. The rack is built for 2-inch receivers and is compatible with standard, electric, mountain, and fat-tire bikes up to 5 inches wide, including RV use scenarios.
Security and stability are enhanced by a keyed hitch lock and two integrated wheel locks, reducing the risk of theft. Rubber-coated straps and soft pads protect tires and frames, while a tilt-and-fold design aids cargo access when parked. The TrailV2 Plus is a versatile option for RV users needing reliable multi-bike transport with thoughtful loading and security features.
- Frame and wheel protection with padded cradles
- Up to 170 lbs total capacity (85 lbs per bike)
- Up to 5″ fat tires; wheelbase up to 50″
- Includes ramp extension, guide kit, locks
Hollywood RV Rider Hitch Bike Rack
The Hollywood RV Rider is tailored for RV travel, carrying two electric bikes up to 80 pounds each for a total of 160 pounds. It focuses on rugged build quality, featuring heavy-duty wheel holders, a locking security cable, and frame grabbers to secure each bike during transit. A hitch tightener adds stability against road vibrations, making it suitable for motorhomes, fifth wheels, and flat-towed setups. This rack is designed to handle standard and fat-tire bikes with a strong emphasis on security and reliability on the road.
Installation relies on a standard 2-inch receiver, and the rack is engineered to withstand road grime and weather exposure. The combination of security features and sturdy construction makes it a solid option for RV owners who prioritize bike protection and theft deterrence on long trips, while maintaining straightforward setup and use.
- Two-bike capacity; per-bike up to 80 lbs
- Locking cable and frame grabbers for security
- Hitch tightener for added stability
- Suitable for standard and fat-tire bikes
MEEVIZ 2-Bike Hitch Rack With Lock
The MEEVIZ 2-Bike Hitch Rack combines heavy-duty steel with protective features to carry two bikes up to 180 pounds total (90 pounds per bike). Wide padded cradles and reinforced straps minimize frame scratches, while soft frame clamps with locks add theft protection. The tilting design enables trunk access even when loaded, and the rack folds compactly for storage. Note that it does not fit swing-out tailgates, so verify your vehicle’s tailgate/trunk configuration before purchase.
This model works with most 2-inch hitch receivers and supports a variety of bikes, including fat-tire and e-bike configurations, depending on wheelbase. Integrated locks enhance security, and the overall build emphasizes stability and ease of use for RV and vehicle owners who value reliable, foldable transport solutions for multiple bikes.
- 180 lbs total capacity (90 lbs per bike)
- Padded cradles and frame clamps with locks
- Tilt-and-fold design for trunk access
- Not compatible with swing-out tailgates
Young Electric 2-Bike Hitch Rack
The Young Electric 2-Bike Hitch Rack is designed for 2-inch hitch receivers and delivers a high total capacity of 200 pounds (100 pounds per bike). It uses soft-padded hooks and wheel straps to cradle bikes while minimizing frame scratches, and includes a rear safety reflector to improve nighttime visibility. The foldable, tilt-back design enables trunk access without removing the rack, making it practical for SUVs and minivans used in RV travel. It supports a broad range of bikes, including fat tires and MTB variants.
With universal tire holders and secure wheel straps, this rack provides stable handling for front-of-RV or rear-hitch setups. The combination of high capacity, foldability, and security features makes it a versatile choice for families and travelers who need to haul multiple bikes on the go without sacrificing cargo space inside the vehicle.
- 200 lbs total capacity (100 lbs per bike)
- Soft-padded hooks and wheel straps
- Foldable and tilt-back design for trunk access
- 2″ hitch receiver compatibility; supports fat tires
Buying Guide: Key Considerations For Front-Mof RV Bike Racks
Choosing the right front-mount or hitch-mounted bike rack for an RV involves balancing several factors to fit your vehicle, bikes, and travel style. Consider mounting method, weight limits, and bike compatibility as primary criteria, then review security, ease of use, and durability for long road trips.
- Mounting method and vehicle compatibility: Front options often use a trailer tongue bunk or a 2-inch hitch receiver. Confirm your RV’s front configuration and available mounting points before purchasing. A-frame tongue systems are common for trailers, while motorhomes may rely on hitch receivers for versatility.
- Weight capacity and bike types: Evaluate total rack capacity and per-bike limits. Fat tires, e-bikes, and standard mountain bikes have different footprint requirements. Ensure wheelbase compatibility and tire width limits (up to 5 inches is common in many models).
- Security features: Look for locking cables, hitch locks, wheel locks, and frame clamps to deter theft. Some racks include integrated locks or security accessories, which can be valuable when camping in unattended spots.
- Load ease and access: Racks with ramps, tilting mechanisms, or front-cradle designs simplify loading, especially for heavier e-bikes. Consider whether you need trunk access with bikes loaded and whether the rack folds for storage.
- Durability and weather resistance: Steel construction with corrosion-resistant finishes withstands road spray and outdoor exposure. Powder coatings and reinforced straps add longevity for frequent travel.
- Bike protection: Padded cradles and soft frame clamps minimize scratches. Rubberized straps and adjustable supports improve stability during transit over rough roads.
- Installation and maintenance: Some racks install quickly on a 2-inch receiver; others require mounting to a trailer tongue. Check whether tools or professional installation are needed and plan for regular inspections of bolts and locking mechanisms.
- Storage and vehicle access: Tilt-back or foldable designs help access trunks or rear hatches when bikes are mounted. For limited garage space, consider whether the rack can fold compactly or be removed easily.
In summary, the best choice depends on your RV configuration and the bikes you haul. Front-tongue bunk systems like the Stromberg Carlson CC-275 excel for A-frame trailers, while multi-bike hitch racks such as TrailV2 Plus or Hollywood RV Rider offer flexibility for motorhomes and larger RVs. Security, ease of use, and compatibility with fat tires or electric bikes should guide your decision, ensuring safe, convenient transportation on every journey.